Z10e Electrostatic Headphone Amp / Integrated Amp

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 3

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 4

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 5

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 6

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 7

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 8

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 9

Z10e Electrostatic Headphone Amp / Integrated Amp - Image 10

LTA is excited to announce the Z10e Electrostatic Headphone Amplifier. With all the magic, realism, and 3D soundstage of ZOTL technology, the Z10e delivers one of the best electrostatic headphone experiences available. In addition, the Z10e is a full function regular dynamic and planar headphone amplifier and a 12-watt per channel integrated speaker amplifier.

A single component solution, the Z10e incorporates the acclaimed ZOTL10 power amplifier, a Berning-designed preamplifier, and the LTA control system with three inputs – all packaged in a beautiful aluminum low-resonance case designed by Fern & Roby.

With startling realism, plentiful bass, and gorgeous mids and highs – 3D music seems as if it’s appearing from a silent, black background.

The LED array display and the milled aluminum front and rear panels exude high quality manufacturing, handmade in the USA.

The Z10e offers all the benefits of the ZOTL technology of three times the tube life and one third the heat output.

Additional information

Specifications	Inputs: 2 single-ended RCA stereo inputs, 1 input using two 3-pin combom XLR/TRS jacks Speaker Output: 4 speaker binding posts, banana or spade Conventional Headphone Outputs: Low: 240mW per channel @ 32 ohms, High: 3W per channel @ 32 ohms Electrostatic Headphone Output: 5 pin Stax interface, 580V bias Subwoofer Output: Stereo subwoofer output (Mono option available upon request) Front Panel Controls: Power switch, Input switch, volume control, and headphone / speaker switch Remote Control: All front panel functions and configuration menu accessed using an aluminum Apple TV Remote Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors Output impedance: 1.2 ohms Power Supply: Linear supply using a Belleson regulator and low ESR poly-organic capacitors Input impedance: 47k 115VAC or 220-240VAC configured at factory – 50/60Hz – IEC receptacle Hum and noise: 94dB below full output (measured at 20Hz-20kHz) Power output with 4-ohm load: 13W, 0.5% THD Power output with 8-ohm load: 12W, 0.5% THD Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB Amplifier class: Push-pull Class AB Voltage gain (8-ohm load): 18dB Amplifier Weight: 18 lbs Power Supply Weight: 5lbs Amplifier Dimensions: 12.75” wide x 14.5” deep (with connectors) x 6.5” tall Power Supply Dimensions: 8" wide, 7.5" deep (with connectors), 3.85" tall Finish: Aluminum case Tube complement: premium NOS two 12AT7s, four 12AU7s, and four EL84s or equivalent Home Theater Function can select any input for fixed volume Display: 16 Levels of brightness and programmable 7-second time out

Specifications

Inputs: 2 single-ended RCA stereo inputs, 1 input using two 3-pin combom XLR/TRS jacks
Speaker Output: 4 speaker binding posts, banana or spade
Conventional Headphone Outputs: Low: 240mW per channel @ 32 ohms, High: 3W per channel @ 32 ohms
Electrostatic Headphone Output: 5 pin Stax interface, 580V bias
Subwoofer Output: Stereo subwoofer output (Mono option available upon request)
Front Panel Controls: Power switch, Input switch, volume control, and headphone / speaker switch
Remote Control: All front panel functions and configuration menu accessed using an aluminum Apple TV Remote
Volume Control: 100 stepped attenuator (smallest step 1/1000th of total value) using Vishay Dale 1% precision resistors
Output impedance: 1.2 ohms
Power Supply: Linear supply using a Belleson regulator and low ESR poly-organic capacitors
Input impedance: 47k
115VAC or 220-240VAC configured at factory – 50/60Hz – IEC receptacle
Hum and noise: 94dB below full output (measured at 20Hz-20kHz)
Power output with 4-ohm load: 13W, 0.5% THD
Power output with 8-ohm load: 12W, 0.5% THD
Frequency response (8-ohm load): 6Hz to 60kHz, +0, -.5dB
Amplifier class: Push-pull Class AB
Voltage gain (8-ohm load): 18dB
Amplifier Weight: 18 lbs
Power Supply Weight: 5lbs
Amplifier Dimensions: 12.75” wide x 14.5” deep (with connectors) x 6.5” tall
Power Supply Dimensions: 8" wide, 7.5" deep (with connectors), 3.85" tall
Finish: Aluminum case
Tube complement: premium NOS two 12AT7s, four 12AU7s, and four EL84s or equivalent
Home Theater Function can select any input for fixed volume
Display: 16 Levels of brightness and programmable 7-second time out

Z10e Electrostatic Headphone Amp / Integrated Amp

Additional information

CONTACT INFO

PRODUCTS

Copyright © 2024 Apex Audio Design